Skip to content
Home » iP8720

iP8720

Congratulations on your new Canon iP8720 printer! This guide will walk you through the initial setup process to ensure that your printer is ready to deliver high-quality prints. Please follow the steps below:

  1. Unboxing

    Carefully unpack your Canon iP8720 printer and remove all the protective materials.

  2. Power Connection

    Locate the power cord provided with the printer. Connect one end of the power cord to the printer’s power input port, and the other end to a nearby power outlet.

  3. Paper Loading

    Open the paper tray located at the front of the printer. Adjust the paper guides to match the size of the paper you will be using. Load a stack of paper into the tray, making sure it is aligned properly and the guides are snug against the paper.

  4. Ink Installation

    The Canon iP8720 printer uses individual ink cartridges. Open the top cover of the printer to access the ink cartridge holder. Install the ink cartridges by pushing them firmly into their respective slots until they click into place. Make sure you install all the required ink cartridges for your printer model.

  5. Power On and Initial Setup

    Press the power button on the printer to turn it on. The printer will go through an initial setup process. Follow any instructions displayed on the printer’s control panel, if applicable.

  6. Connection and Configuration

    Connect the printer to your computer using a USB cable or configure it for wireless printing, depending on your preference. If using a USB cable, simply connect it to the printer and your computer. If setting up wireless printing, follow the instructions provided in the printer’s user manual.

  7. Software Installation

    Insert the setup CD provided with the printer into your computer’s CD drive. If your computer doesn’t have a CD drive, you can download the latest software and drivers from the Canon support website. Follow the on-screen prompts to install the necessary software and drivers.

  8. Test Print

    Once the software installation and printer connection are complete, perform a test print to ensure that your printer is functioning correctly. Open a document or photo on your computer and select “Print.” Choose the Canon iP8720 printer from the list of available printers, adjust any print settings if necessary, and click “Print” to initiate the test print.

Congratulations! Your Canon iP8720 printer is now set up and ready to use. Refer to the printer’s user manual for detailed information on using its features and functions. Enjoy high-quality prints with your new Canon iP8720 printer!

Additionally here is a printer driver setup: