Open the box fully and lift the printer upward with support from both sides.
CanonMegaTank
G3625
Last updated July 13, 2026
The G3625 MegaTank bundle is an excellent value for anyone needing high-volume, low-cost colour printing at home. It offers strong yields and integrated scanning/copying, but it’s less suitable for users who need fast speed, auto-duplex, or office-grade automation.
CountryUnited States
OSUnknown
In this Setup
Requirements & Prerequisite
Gather the following items before you begin setup. Tick each one as you get it.
Unboxing & Initial Setup
- Remove packaging materials.
- Remove any protective packaging tape (usually in Red or Orange Color).
- Open the panel and install the cartridges.
- Wait for the carriage to move to the centre
- Load supported preferred paper into the tray.
Manuals & Guides
Canon G3625 setup on Windows
Canon G3625 setup on macOS
Canon G3625 setup on iPhone & iPad
Canon G3625 setup on Android
Canon G3625 setup on Chromebook
Troubleshooting Steps
- Printer Not Powering On
- No lights or sounds
- Ensure the power cable is firmly plugged into the wall and printer.
- Try a different power outlet.
- Press and hold the Power button for 5 seconds.
- If still dead, unplug for 10 minutes, then retry.
- No lights or sounds
- Wi-Fi Connection Issues
- Printer not connecting to Wi-Fi or computer not detecting printer.
- Make sure Wi-Fi is enabled on printer:
- Hold the Wi-Fi button until power light flashes → press Black or Color button → Wi-Fi light should blink and then become steady.
- Ensure your printer and device are on the same Wi-Fi network.
- Reinstall the printer driver on your device or use the Canon PRINT Inkjet/SELPHY app (for mobile).
- Reset network settings:
- Hold Stop until the alarm lamp flashes 21 times, then release to reset network settings.
- Printer not connecting to Wi-Fi or computer not detecting printer.
- Poor Print Quality (Lines, Faded, Smudges)
- Blurry or streaky prints
- Print Head Cleaning:
- Windows: Go to Control Panel > Devices and Printers > Canon G3620 series > Printing Preferences > Maintenance tab > Cleaning.
- Mac:
- Use System Preferences > Printers & Scanners > G3625 > Options & Supplies > Utility.
- Perform Deep Cleaning if quality is still bad.
- Run Print Head Alignment.
- Check ink levels. If ink is low, refill tanks with Canon GI-61 ink.
- Paper Jam or Feed Issues
- Power off printer.
- Open front and rear covers to inspect for jammed paper.
- Gently remove paper, avoiding any rips.
- Check for any debris inside.
- Reinsert paper properly (aligned and not overfilled). • Use only recommended paper sizes and types