Open the box fully and lift the printer upward with support from both sides.
CanonimageRUNNER ADVANCE
imageRUNNER ADVANCE 4235
Last updated July 13, 2026
Canon imageRUNNER ADVANCE 4235 is a monochrome laser multifunctional printer. It has optional finishing units like Collate, Group, Offset, Staple, Saddle Stitch, Hole Punch. Canon imageRUNNER ADVANCE 4235 comes with high end security features like Document scan lock kit, Secure watermark, Encrypted printing software.
CountryUnited States
OSUnknown
In this Setup
Requirements & Prerequisite
Gather the following items before you begin setup. Tick each one as you get it.
Unboxing & Initial Setup
- Take the printer out of the box.
- Take out all the accessories and remove the packaging.
- Remove and discard the protective tape from outside and inside.
- Connect the power cord to turn the printer on.
- Install the toner cartridges.
- Load paper into the paper trays.
Manuals & Guides
Canon imageRUNNER ADVANCE 4235 setup on Windows
Canon imageRUNNER ADVANCE 4235 setup on macOS
Canon imageRUNNER ADVANCE 4235 setup on iPhone & iPad
Canon imageRUNNER ADVANCE 4235 setup on Android
Canon imageRUNNER ADVANCE 4235 setup on Chromebook
Troubleshooting Steps
- The Machine Cannot Be Powered On:
- Press the ON button.
- Make sure that the power plug is securely plugged into the power cord connector of the machine, then turn it back on.
- Make sure that the USB cable is securely plugged in.
- Unplug the machine from the power supply, then plug the machine back in and turn the machine back on after leaving it for at least 2 minutes.
- If you are printing from the computer and there are unnecessary print jobs, delete them.
- Make sure of the following when you load paper:
- When loading two or more sheets of paper, align the edges of the sheets before loading.
- Make sure that the paper stack does not exceed the paper load limit.
- Always load the paper in portrait orientation, regardless of the printing orientation.
- Load the paper with the print side facing up.
- Check to see if the paper you are printing on is not too thick or curled.
- Confirm that the media type and the paper size settings correspond with the loaded paper.
- Make sure that there are not any foreign objects in the rear tray.
- Check Cartridges:
- When a FINE cartridge runs out of ink, replace it with a new one.
- Is the FINE cartridge installed properly?
- If the FINE cartridge is not installed securely, ink may not be ejected correctly.
- Retract the output tray extension and the paper output tray, open the cover, then remove the FINE cartridges, Then install the FINE cartridges again. Push the FINE cartridge until it clicks into place.
- Perform the Print Head Deep Cleaning.
- Paper Jams:
- When paper is jammed, the Alarm lamp flashes and a troubleshooting message is displayed on the computer screen automatically.
- Take the papers out and arrange them in a proper way.