Open the box fully and lift the printer upward with support from both sides.
CanonPIXMA
TS5391
Last updated July 13, 2026
Canon TS5391 is a wireless all-in-one inkjet printer with print, scan, and copy capabilities. It is a compact printer and can easily fit in small spaces. It is a cost -friendly printer. Canon TS5391 supports wireless connectivity.
CountryUnited States
OSUnknown
In this Setup
Requirements & Prerequisite
Gather the following items before you begin setup. Tick each one as you get it.
Unboxing & Initial Setup
- Remove the outer packaging of the box and take the printer out of it.
- Take all the accessories from the box.
- Remove all the protective tape from the printer.
- Connect the power cord, and then press the ON button.
- Install the toner cartridges.
- Install the paper.
Manuals & Guides
Canon TS5391 setup on Windows
Canon TS5391 setup on macOS
Canon TS5391 setup on iPhone & iPad
Canon TS5391 setup on Android
Canon TS5391 setup on Chromebook
Troubleshooting Steps
- Printer not connecting to wifi:
- Possible Causes: Incorrect password, weak, signal or outdated firmware.
- Solutions:
- a. Ensure your Wi-Fi password is correct
- b. Place the printer close to the router
- c. Re-run Easy Wireless Connect
- d. Press Setup >Wi-Fi Setup >Easy Wireless Connect
- e. Restart the router and printer
- f. Check for firmware updates via Canon’s official website
- Print Not Detected by computer or mobile:
- Solutions:
- a. Ensure both printer and device are on the same Wi-Fi network
- b. Restart your printer and device
- c. Reinstall the Canon PRINT Inkjet/SELPHY app (for mobile)
- d. For USB connection, ensure the cable is securely connected
- e. On Windows/Mac, reinstall the printer driver
- Paper Jam:
- Solutions:
- a. Turn off the printer
- b. Gently remove jammed paper from the rear tray, output slot, or inside the printer
- c. Check for torn paper pieces
- d. Restart the printer
- Poor Print Quality (Faded, Streaks, Missing Colors)
- Solution:
- a. Check ink levels and replace cartridges if needed
- b. Run Print Head Cleaning:
- c. Press Setup >Maintenance>Cleaning
- d. Perform Print Head Alignment via the same menu
- e. Ensure you’re using compatible paper