Open the box fully and lift the printer upward with support from both sides.
CanonPIXMA
MX350
Last updated July 13, 2026
Canon PIXMA MX350 is an all-in-one inkjet printer. It also offers scanning and copying. It comes with immense features like Auto Photo Fix II, Red eye correction, vivid photo, photo optimizer pro, noise reduction, face brightener, image optimizer, brightness/contrast/color balance adjustment, image trimming, and effects (sepia/simulate illustration). Canon PIXMA MX350 has CIS color scanner.
CountryUnited States
OSUnknown
In this Setup
Requirements & Prerequisite
Gather the following items before you begin setup. Tick each one as you get it.
Unboxing & Initial Setup
- Take the printer out of the box.
- Remove all the orange tape and protective material.
- Plug in the power cord and turn on the printer.
- Install the ink.
- Load plain LTR or A4 size paper.
Manuals & Guides
Canon MX350 setup on Windows
Canon MX350 setup on macOS
Canon MX350 setup on iPhone & iPad
Canon MX350 setup on Android
Troubleshooting Steps
- Printer not connecting to wi-fi:
- Possible Causes: Incorrect password, weak, signal or outdated firmware.
- Solutions:
- a. Ensure your Wi-Fi password is correct
- b. Place the printer close to the router
- c. Re-run Easy Wireless Connect
- d. Press Setup >Wi-Fi Setup >Easy Wireless Connect
- e. Restart the router and printer
- f. Check for firmware updates via Canon’s official website
- Print Not Detected by computer or mobile:
- Solutions:
- a. Ensure both printer and device are on the same Wi-Fi network
- b. Restart your printer and device
- c. Reinstall the Canon PRINT Inkjet/SELPHY app (for mobile)
- d. For USB connection, ensure the cable is securely connected
- e. On Windows/Mac, reinstall the printer driver
- Paper Jam:
- Solutions:
- a. Turn off the printer
- b. Gently remove jammed paper from the rear tray, output slot, or inside the printer
- c. Check for torn paper pieces
- d. Restart the printer
- Poor Print Quality (Faded, Streaks, Missing Colors)
- Solution:
- a. Check ink levels and replace cartridges if needed
- b. Run Print Head Cleaning:
- c. Press Setup >Maintenance>Cleaning
- d. Perform Print Head Alignment via the same menu
- e. Ensure you’re using compatible paper