CanonPIXMA

PRO-4600

Last updated July 13, 2026

Canon imagePROGRAF PRO-4600 comes with new LUCIA PRO II pigment ink using red and blue inks along with two shades of gray. It produces photo artwork with rich colors and delicate gradation. For glossy paper, the chroma optimizer is designed to suppress reflection that interferes with viewing and produces the prints original colors.

CountryUnited States OSUnknown

In this Setup

  1. 1 Requirements & Prerequisite
  2. 2 Features
  3. 3 Unboxing & Initial Setup
  4. 4 Manuals & Guides Reg. only
  5. 5 Troubleshooting Steps Reg. only
  6. 6 Downloads Reg. only
  7. 7 Error codes Reg. only
  8. 8 FAQ Reg. only
Requirements & Prerequisite

Gather the following items before you begin setup. Tick each one as you get it.

Unboxing & Initial Setup

Step 1 of 5 Take printer out

Open the box fully and lift the printer upward with support from both sides.

  1. Remove the cardboard lid and take the printer out.
  2. Then remove the ink tanks, basket, cables, hardware, print head, instruction booklets and roll adaptors.
  3. Remove the stand.
  4. Then start removing the packaging.
  5. Now fix the stand legs.
  6. Now put up the printer and put it on the stand.
  7. Remove the red taggings from the printer.
  8. Plug in the power cord and turn on the printer.
  9. Select your language, time zone.
  10. Press ok to set up.
  11. Open the packaging and remove the orange tape from across the top of the tray.
  12. Lift the print head by the handle on the top and remove from the tray.
  13. Now lift the top cover to install the print head carefully.
  14. Install the print head into the carriage.
  15. Close the cover.
  16. Open the two ink tank covers and shake the ink tanks.
  17. Pull each ink tank into the corresponding slot.
  18. Once the ink tanks are installed, close the ink tank covers.
  19. Load the paper roll.

Manuals & Guides

Canon PRO-4600 setup on Windows

Setting up Canon imagePROGRAF PRO-4600 – Windows (Wifi):
Prepare the printer:
a. On touchscreen scroll down to LAN settings.
b. Select change LAN.
c. Click on activate wireless LAN.
d. You will be brought back to the main screen, scroll down and choose the LAN settings again.
e. Select wireless LAN setup.
f. Select standard setup.
g. Choose your wifi network name from the available list.
h. Enter the password.
Download the Drivers:
a. Download and install the driver from the bottom of the page.
b. Once the installation is completed, run the installed file.

Print the Test page:
a. Print a test page to confirm the setup.
USB Setup (Wired Setup):
Download the Drivers:
a. Download and install the necessary drivers from the bottom of the page.
b. Once the driver installation is completed, run the installed file.
Connect the USB Cable to your printer:
a. Plug the USB cable to your printer and the other end to your PC.
b. Go to the settings of your PC.
c. Search for bluetooth and devices.
d. Click on Printers and Scanners.
e. From the available printers list select your Canon imagePROGRAF PRO-4600.
Print the Test page:
a. Print a test page to confirm the setup.

Full Guides and Drivers Available

Register to Download & Connect

To ensure you receive the highest level of support and access to essential resources, you will have to register with us. As a Premium User, you will gain exclusive access to the latest Driver Downloads, Detailed How-To Guides, and Priority Live Chat Support. This upgrade is essential for optimizing your experience and troubleshooting effectively.

Already registered? Log in

Choose your plan
Card details

Pay with a different payment method

Troubleshooting Steps

  1. Printer not connecting to wi-fi:
  2. Possible Causes: Incorrect password, weak, signal or outdated firmware.
  3. Solutions:
  4. a. Ensure your Wi-Fi password is correct
  5. b. Place the printer close to the router
  6. c. Re-run Easy Wireless Connect
  7. d. Press Setup >Wi-Fi Setup >Easy Wireless Connect
  8. e. Restart the router and printer
  9. f. Check for firmware updates via Canon’s official website
  10. Print Not Detected by computer or mobile:
  11. Solutions:
  12. a. Ensure both printer and device are on the same Wi-Fi network
  13. b. Restart your printer and device
  14. c. Reinstall the Canon PRINT Inkjet/SELPHY app (for mobile)
  15. d. For USB connection, ensure the cable is securely connected
  16. e. On Windows/Mac, reinstall the printer driver
  17. Paper Jam:
  18. Solutions:
  19. a. Turn off the printer
  20. b. Gently remove jammed paper from the rear tray, output slot, or inside the printer
  21. c. Check for torn paper pieces
  22. d. Restart the printer
  23. Poor Print Quality (Faded, Streaks, Missing Colors)
  24. Solution:
  25. a. Check ink levels and replace cartridges if needed
  26. b. Run Print Head Cleaning:
  27. c. Press Setup >Maintenance>Cleaning
  28. d. Perform Print Head Alignment via the same menu
  29. e. Ensure you’re using compatible paper

Downloads

Driver Download

Your model PRO-4600

Download drivers

App Download

Canon PRINT for phones and tablets

iOS App Android App

Other PIXMA Models

Browse all
PIXMA Setup compatible
Canon LBP3000 Setup guide, unboxing help and driver links
PIXMA Setup compatible
Canon G2930G Setup guide, unboxing help and driver links
PIXMA Setup compatible
Canon G3000 Setup guide, unboxing help and driver links
PIXMA Setup compatible
Canon G3010 Setup guide, unboxing help and driver links
PIXMA Setup compatible
Canon IX6800 Setup guide, unboxing help and driver links
PIXMA Setup compatible
Canon IX6810 Setup guide, unboxing help and driver links
PIXMA Setup compatible
Canon LBP171 Setup guide, unboxing help and driver links
PIXMA Setup compatible
Canon LBP361dw Setup guide, unboxing help and driver links
PIXMA Setup compatible
Canon LBP361i Setup guide, unboxing help and driver links
PIXMA Setup compatible
Canon LBP362i Setup guide, unboxing help and driver links
PIXMA Setup compatible
Canon MG2200 Setup guide, unboxing help and driver links
PIXMA Setup compatible
Canon MG2400 Setup guide, unboxing help and driver links