CanonimagePROGRAF

TX-5410

Last updated July 13, 2026

Canon imagePROGRAF TX-5410 is a large format printer with features like fast and high quality prints, advanced security, and impressive media handling. It uses LUCIA TD pigment ink for sharp text, accurate lines. Canon imagePROGRAF TX-5410 delivers water resistant printing. It comes with an extensive suite of software which includes Direct Print Plus for batch printing multiple file types and PosterArtist Lite for design work.

CountryUnited States OSUnknown

In this Setup

  1. 1 Requirements & Prerequisite
  2. 2 Features
  3. 3 Unboxing & Initial Setup
  4. 4 Manuals & Guides Reg. only
  5. 5 Troubleshooting Steps Reg. only
  6. 6 Downloads Reg. only
  7. 7 Error codes Reg. only
  8. 8 FAQ Reg. only
Requirements & Prerequisite

Gather the following items before you begin setup. Tick each one as you get it.

Unboxing & Initial Setup

Step 1 of 5 Take printer out

Open the box fully and lift the printer upward with support from both sides.

  1. Take the printer out of the box.
  2. Remove the packaging and protective tape.
  3. Assemble the stand and lift the printer, place the printer on the stand.
  4. Turn the printer on.
  5. Select language, time zone, region.
  6. Install the ink tanks.
  7. Install the print head.
  8. Load the paper.

Manuals & Guides

Canon TX-5410 setup on Windows

Setting up Canon image PROGRAF TX-5410 – Windows (Wi-fi):

  1. Prepare the printer:
    • Tap the home icon on the printer display.
    • Then tap LAN settings.
    • Tap Wi-Fi.
    • Tap Settings.
    • Tap Wi-Fi setup.
    • Tap Easy wireless connect.
    • Tap OK.
    • The printer preparation is complete.
  2. Download the Drivers:
    • Download and install the driver from the bottom of the page.
    • Once the installation is completed, run the installed file.
  3. Print the Test page:
    • Print a test page to confirm the setup.

USB Setup (Wired Setup):

  1. Download the Drivers:
    • Download and install the necessary drivers from the bottom of the page.
    • Once the driver installation is completed, run the installed file.
  2. Connect the USB Cable to your printer:
    • Plug the USB cable to your printer and the other end to your PC.
    • Go to the settings of your PC.
    • Search for bluetooth and devices.
    • Click on Printers and Scanners.
    • From the available printers list select your Canon image PROGRAF TX-5410.
  3. Print the Test page:
    • Print a test page to confirm the setup.
Full Guides and Drivers Available

Register to Download & Connect

To ensure you receive the highest level of support and access to essential resources, you will have to register with us. As a Premium User, you will gain exclusive access to the latest Driver Downloads, Detailed How-To Guides, and Priority Live Chat Support. This upgrade is essential for optimizing your experience and troubleshooting effectively.

Already registered? Log in

Choose your plan
Card details

Pay with a different payment method

Troubleshooting Steps

  1. Printer not connecting to wifi:
    • Possible Causes: Incorrect password, weak, signal or outdated firmware.
    • Solutions:
      • Ensure your Wi-Fi password is correct
      • Place the printer close to the router
      • Re-run Easy Wireless Connect
      • Press Setup >Wi-Fi Setup >Easy Wireless Connect
      • Restart the router and printer
      • Check for firmware updates via Canon’s official website
  2. Print Not Detected by computer or mobile:
    • Solutions:
      • Ensure both printer and device are on the same Wi-Fi network
      • Restart your printer and device
      • Reinstall the Canon PRINT Inkjet/SELPHY app (for mobile)
      • For USB connection, ensure the cable is securely connected
      • On Windows/Mac, reinstall the printer driver
  3. Paper Jam:
    • Solutions:
      • Turn off the printer
      • Gently remove jammed paper from the rear tray, output slot, or inside the printer
      • Check for torn paper pieces
      • Restart the printer
  4. Poor Print Quality (Faded, Streaks, Missing Colors):
    • Solution:
      • Check ink levels and replace cartridges if needed
      • Run Print Head Cleaning:
      • Press Setup >Maintenance>Cleaning
      • Perform Print Head Alignment via the same menu
      • Ensure you’re using compatible paper

Downloads

Driver Download

Your model TX-5410

Download drivers

App Download

Canon PRINT for phones and tablets

iOS App Android App

Other imagePROGRAF Models

Browse all
imagePROGRAF Setup compatible
Canon GP-200 Setup guide, unboxing help and driver links
imagePROGRAF Setup compatible
Canon GP-2000 Setup guide, unboxing help and driver links
imagePROGRAF Setup compatible
Canon GP-2600S Setup guide, unboxing help and driver links
imagePROGRAF Setup compatible
Canon GP-300 Setup guide, unboxing help and driver links
imagePROGRAF Setup compatible
Canon GP-4000 Setup guide, unboxing help and driver links
imagePROGRAF Setup compatible
Canon GP-4600S Setup guide, unboxing help and driver links
imagePROGRAF Setup compatible
Canon GP-520 Setup guide, unboxing help and driver links
imagePROGRAF Setup compatible
Canon GP-5200 Setup guide, unboxing help and driver links
imagePROGRAF Setup compatible
Canon GP-526S Setup guide, unboxing help and driver links
imagePROGRAF Setup compatible
Canon GP-5300 Setup guide, unboxing help and driver links
imagePROGRAF Setup compatible
Canon GP-540 Setup guide, unboxing help and driver links
imagePROGRAF Setup compatible
Canon PRO-4100 Setup guide, unboxing help and driver links