Open the box fully and lift the printer upward with support from both sides.
CanonPIXMA
MG5795
Last updated August 8, 2026
The MG5795 is a wireless all-in-one inkjet printer from the PIXMA series, designed for home use with an emphasis on hassle-free photo and document printing, scanning, and copying.
CountryUnited States
OSUnknown
In this Setup
Requirements & Prerequisite
Gather the following items before you begin setup. Tick each one as you get it.
Unboxing & Initial Setup
- Remove all packaging material and protective tapes from the printer
- Take out documentation material, power cord and other accessories from the box.
- Connect the power cord and turn ON the printer
- Install the ink cartridges
- Load paper into the paper tray
Manuals & Guides
MG5795 setup on Windows
MG5795 setup on macOS
MG5795 setup on iPhone & iPad
MG5795 setup on Android
MG5795 setup on Chromebook
Troubleshooting Steps
- Initial Setup:
- Power on: Ensure the printer is turned on and paper is loaded.
- Software Installation: Download and install the necessary printer drivers and software from the Canon support website.
- Choose Connection Method: Select either “Easy Wireless Connect” or WPS.
- WPS Connection (If Available):
- readily accessible.
- Printer Setup: Press and hold the Wi-Fi button on the printer until the Wi-Fi lamp flashes, then press the Color button and the Wi-Fi button again until the Direct lamp lights up.
- Router Activation: Press the WPS button on your router within 2 minutes.
- Confirmation: The Wi-Fi lamp on the printer will flash while connecting and remain lit when connected.