CanonimagePROGRAF

TM-300

Last updated July 13, 2026

Canon imagePROGRAF TM-300 is 60% quieter and can unobtrusively fit into any working environment. Even on plain paper, the full pigment Lucia TD ink system produces exceptional print quality, and continuous printing boosts output productivity. It boosts productivity by printing faster, thanks to a 6-channel optimised 1.07-inch print head. Canon imagePROGRAF TM-300 comes with software suite like Direct Print & Share, PosterArtist Lite and Free Layout Plus support CAD and poster production.

CountryUnited States OSUnknown

In this Setup

  1. 1 Requirements & Prerequisite
  2. 2 Features
  3. 3 Unboxing & Initial Setup
  4. 4 Manuals & Guides Reg. only
  5. 5 Troubleshooting Steps Reg. only
  6. 6 Downloads Reg. only
  7. 7 Error codes Reg. only
  8. 8 FAQ Reg. only
Requirements & Prerequisite

Gather the following items before you begin setup. Tick each one as you get it.

Unboxing & Initial Setup

Step 1 of 5 Take printer out

Open the box fully and lift the printer upward with support from both sides.

  1. Take out the printer from the box.
  2. Remove the packaging material and protective tape.
  3. Plug in the power cable and turn the printer on.
  4. Select language, time zone, date & time.
  5. Select load paper on the control panel and load the paper roll.

Manuals & Guides

Canon TM-300 setup on Windows

Setting up Canon imagePROGRAF TM-300 – Windows (Wifi):

  1. Prepare the printer: 

a. Press the home button, press the network button.

b. Select wifi setup.

c. Choose Easy wireless connect, and then select Start.

  1. Download the Drivers:

a. Download and install the driver from the bottom of the page.

b. Once the installation is completed, run the installed file.

  1. Print the Test page:

a. Print a test page to confirm the setup.

USB Setup (Wired Setup):

  1. Download the Drivers:

a. Download and install the necessary drivers from the bottom of the page.

b. Once the driver installation is completed, run the installed file.

  1. Connect the USB Cable to your printer:

a. Plug the USB cable to your printer and the other end to your PC.

b. Go to the settings of your PC.

c. Search for bluetooth and devices.

d. Click on Printers and Scanners.

e. From the available printers list select your Canon imagePROGRAF TM-300

  1. Print the Test page:

a. Print a test page to confirm the setup.

Full Guides and Drivers Available

Register to Download & Connect

To ensure you receive the highest level of support and access to essential resources, you will have to register with us. As a Premium User, you will gain exclusive access to the latest Driver Downloads, Detailed How-To Guides, and Priority Live Chat Support. This upgrade is essential for optimizing your experience and troubleshooting effectively.

Already registered? Log in

Choose your plan
Card details

Pay with a different payment method

Troubleshooting Steps

  1. Printer not connecting to wifi:
  2. Possible Causes: Incorrect password, weak, signal or outdated firmware.
  3. Solutions:
  4. a. Ensure your Wi-Fi password is correct
  5. b. Place the printer close to the router
  6. c. Re-run Easy Wireless Connect
  7. d. Press Setup >Wi-Fi Setup >Easy Wireless Connect
  8. e. Restart the router and printer
  9. f. Check for firmware updates via Canon’s official website
  10. Print Not Detected by computer or mobile:
  11. Solutions:
  12. a. Ensure both printer and device are on the same Wi-Fi network
  13. b. Restart your printer and device
  14. c. Reinstall the Canon PRINT Inkjet/SELPHY app (for mobile)
  15. d. For USB connection, ensure the cable is securely connected
  16. e. On Windows/Mac, reinstall the printer driver
  17. Paper Jam:
  18. Solutions:
  19. a. Turn off the printer
  20. b. Gently remove jammed paper from the rear tray, output slot, or inside the printer
  21. c. Check for torn paper pieces
  22. d. Restart the printer
  23. Poor Print Quality (Faded, Streaks, Missing Colors)
  24. Solution:
  25. a. Check ink levels and replace cartridges if needed
  26. b. Run Print Head Cleaning:
  27. c. Press Setup >Maintenance>Cleaning
  28. d. Perform Print Head Alignment via the same menu
  29. e. Ensure you’re using compatible paper

Downloads

Driver Download

Your model TM-300

Download drivers

App Download

Canon PRINT for phones and tablets

iOS App Android App

Other imagePROGRAF Models

Browse all
imagePROGRAF Setup compatible
Canon GP-200 Setup guide, unboxing help and driver links
imagePROGRAF Setup compatible
Canon GP-2000 Setup guide, unboxing help and driver links
imagePROGRAF Setup compatible
Canon GP-2600S Setup guide, unboxing help and driver links
imagePROGRAF Setup compatible
Canon GP-300 Setup guide, unboxing help and driver links
imagePROGRAF Setup compatible
Canon GP-4000 Setup guide, unboxing help and driver links
imagePROGRAF Setup compatible
Canon GP-4600S Setup guide, unboxing help and driver links
imagePROGRAF Setup compatible
Canon GP-520 Setup guide, unboxing help and driver links
imagePROGRAF Setup compatible
Canon GP-5200 Setup guide, unboxing help and driver links
imagePROGRAF Setup compatible
Canon GP-526S Setup guide, unboxing help and driver links
imagePROGRAF Setup compatible
Canon GP-5300 Setup guide, unboxing help and driver links
imagePROGRAF Setup compatible
Canon GP-540 Setup guide, unboxing help and driver links
imagePROGRAF Setup compatible
Canon PRO-4100 Setup guide, unboxing help and driver links