GP-4000

Congratulations on your new Canon GP-4000 printer! This guide will walk you through the initial setup process to ensure that your printer is ready to deliver high-quality prints. Please follow the steps below:

1. Unboxing

   Carefully unpack your Canon GP-4000 printer and remove all the protective materials.

2. Power Connection

   Locate the power cord provided with the printer. Connect one end of the power cord to the printer’s power input port, and the other end to a nearby power outlet.

3. Paper Loading

   Open the paper tray located at the front of the printer. Adjust the paper guides to match the size of the paper you will be using. Load a stack of paper into the tray, making sure it is aligned properly and the guides are snug against the paper.

4. Toner Cartridge Installation

   Open the printer’s front cover. Locate the toner cartridge compartment and remove the protective cover from the new toner cartridge. Insert the toner cartridge into the printer, aligning it with the designated slots, and press it firmly until it clicks into place. Close the printer’s front cover.

5. Power On and Initial Setup

   Press the power button on the printer to turn it on. The printer will go through an initial setup process. Follow any instructions displayed on the printer’s control panel, if applicable.

6. Connection and Configuration

   Connect the printer to your computer using a USB cable. If prompted, install the necessary printer drivers and software on your computer. You can find the drivers and software on the Canon website or the installation CD provided with the printer.

7. Test Print

   Once the installation is complete, perform a test print to ensure that your printer is working correctly. Open a document or image on your computer and select “Print.” Choose the Canon GP-4000 printer from the list of available printers, adjust any print settings if necessary, and click “Print” to initiate the test print.